ATC Consumer Hifi P2

# ATC 305050
True Dual Mono Power Amplfier 300W/8

Not for sale in our online shop.
Find a dealer here.

Current status

1 in stock

Product description

The P2 generates 300W/Ch - twice the power of its smaller P1 sibling! It will drive the most challenging loudspeakers with ATC's signature virtues of wide bandwidth and ultra-low distortion. The ATC P2 is a Dual-Mono design, keeping the power supplies, signal and return paths discreet. This approach ensures that the amplifier will achieve the maximum signal separation with minimal crosstalk, and that intermodulation between channels via the power supplies is reduced to an absolute minimum across a frequency range of 400kHz. It also means that the power delivery from one channel cannot affect the specified power available from the other.

New Top Cover/Lid Design
The lid/cover thickness has been increased by 30%. The result is stiffer and heavier and gives the 'feel' of high quality. The design of the venting has also been revised; the steel mesh covering the heatsink vents has been replaced by a beautiful acid-etched stainless steel insert. Not only does this component greatly enhance the amplifier visuals, it also reduces lid/cover vibration.

New Power Supply Design
The P2's power supply includes a massive, custom-made 400 VA low-noise transformer for each channel. The final design of these transformers is the result of seven design iterations with the goal of achieving best possible audio performance and lowest possible mechanical noise. This was achieved by using a very high grade steel core which is then vacuum impregnated with high temperature resin, post winding. The mains power 'soft-start' feature has also been revised, slowing the rate at which the unit powers up.

Overview
300W per channel
True dual-mono design delivers full power simultaneously from both channels, with minimal crosstalk
Grounded source class A/B circuit topology as found in ATC’s renowned active loudspeakers
Ultra wide bandwidth, low distortion and high dynamic range ensure tonal accuracy and perfectly timed transients
No compromise, high performance power supply and large heatsinks guarantee outstanding stability and long term reliability
Neutral fidelity ensures excellent product compatibility
Hand built in the UK and supported by a 6 year warranty

P2 Specifications:
o Max Continuous Output Power : 300W (8 Ohm, 1% THD)
o Input Sensitivity : 2V rms (ref. 150W out)
o Input Impedance : 10k Ohm/leg
o Frequency Response : <2Hz - >400kHz (-3dB)
o Signal to Noise Ratio : >110dB (DIN)
o Crosstalk : >100dB
o THD : >0.002%/-95dB
o Dimensions (HxWxD) : 141x448x337mm (5.6"x17.6" x13.3")
o Weight : 30kg / 66lbs
o 6 year warranty